300MM micro channels are suitable for the ridged roof as shown above.
Mounting kit Package includes following products:
1. Micro channel 30x35mmx300mm x 8 nos
2.Spring nut x 8 nos
3.35mm end clamps x 4 nos
4. Middle clamps x 4 nos
5.Allen bolt 30MM x 8 nos
Steps for TIN roof solar panel mounting.
Step 1: Fix the micro channels on the TIN roof with self-threading screws or bolt-nuts.
One micro channel for each corner panel, total 4 nos.
4 nos Middle micro channel host the middle panels.
Micro channel 30x35mm x 4 no’s for the 2 corner panels
Micro channel 30x35mm x 4 no’s for the 1 middle panel
Step 2: Insert the Spring nut in to the groove of the micro channel.
Spring nut x 8 nos
Step 3: Fit the 4 middle clamps for the center micro channel spring nuts around the middle solar panel frame on all sides.
Step 4: Fit the end clamps for outer end of the panel fastening to the panel frame.
35mm x 4 nos
Step 5: Fasten the Allen bot to the Spring nut on middle clamps and end clamps
Allen bolt 30MM x 8 nos
When to choose 300MM instead of 150MM micro channels?
150MM Channel will not bridge between the ridges, in that case, you will need 300MM channels for ridged roofs.